[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: PC: Atlas U Boats
- Subject: Re: PC: Atlas U Boats
- From: NHJJ4@xxxxxxx
- Date: Sat, 18 Aug 2001 18:01:02 EDT
I have a lot of luck with Denatured Alcohol. I used a Rubbermaid(seal n
container. I put both the parts to strip and Alcohol in and burp the top and
let them sit in it for about 1 Hr. then check and turn over and check again.
It works real good with L/L to strip off the paint. After you get your body
cut,filled,sanded and ready for paint I use a silver to prime with. it covers
well and will show you where you need to clean up after sanding or using body
filler. And doesn't cover up the detail. Just thin and spray and you wont
believe what you missed. It will bring out all the file and sanding marks.
Better now then after you get it painted.
Main Index |